The NZXT H210i is the successor of the H200i. Like its predecessors, the Mini-Tower offers a proven, no-frills design. The mounting mechanism of the tempered glass side panel has been optimized and now requires only one screw at the rear of the housing. This gives a cleaner look and the glass is less under tension. In addition, NZXT installs the Smart Device V2 to control fans and RGB LED accessories and refreshes the front panel with new connections.The Features of the NZXT H210i Mini-ITX Case at a Glance:Mini-ITX case from NZXT in whiteIntegrated controller for fan and RGB LEDsTwo Aer F120 fans pre-installedLarge side window made of tempered glassIncludes addressable NZXT HUE 2 RGB LED stripSpace for one 240 and one 120 radiatorSlots for up to three 2.5-inch drives and one 3.5-inch driveNZXT H210i: Mini-ITX package with Tempered GlassNZXT again relies on the proven cuboid design with smooth outer surfaces and optimised proportions for the H210i. Changes in appearance are primarily of a practical nature: the tempered glass side panel of the predecessor was attached to the chassis with four knurled screws. On the NZXT H210i, on the other hand, the side surface is completely flat. A single knurled screw on the back of the case provides a secure grip and easier access to the inside of the computer. As a special feature the NZXT H210i mini tower has an integrated controller with NZXT CAM support, called Smart Device V2. It is used to control the pre-installed NXZT Aer F fans and the NXZT HUE 2-RGB-LED-Strips included in the scope of delivery, which are immediately visible through the tempered glass window. A total of nine fans can be connected to the three PWM connectors via Y-cables. The RGB connectors together support four HUE 2 strips or up to five NZXT Aer RGB fans. An acoustic sensor helps to determine the optimum balance between cooling and noise development. The system is controlled via the feature-rich software on the PC.Air and Water Cooling OptionsIf you rely on traditional air cooling, the NZXT H210i offers a lot despite its compact dimensions: At the front there is room for two 140 or 120 fans and in the roof as well as in the back wall there is room for one 120 mm fan each. For processor coolers, a maximum height of 165 millimeters is provided. NZXT equips the Mini Tower as standard with in-house fans from the Aer series: A black 120 model is pre-installed in the cover and on the back. The fans ensure adequate airflow. Removable dust filters are mounted on the front and under the power supply unit. The installation of a custom water cooling system was also considered: In front the user can install a 240 mm radiator. In addition, a 120 heat exchanger can be installed in the rear wall. In the front 85 millimetres are provided and in the rear wall 42 millimetres. On the cable cover between mainboard and housing front compensation tank and pump with up to 150 mm overall height can be installed.Plenty of Space for HardwareThe interior of the NZXT H210i is limited, but well structured. Only Mini-ITX format motherboards can be used . Two slots are available for expansion cards. Graphics cards may be up to 325 millimeters long. Like its predecessors, the NZXT H210i has no external drive bays. Internally, however, a quite large number of storage devices can be installed: Under the power supply cover a 3.5 inch hard disk can be installed in the bottom of the case. The holes are also suitable for a 2.5-inch drive. Behind the motherboard tray there is space for two 2.5-inch drives mounted vertically and another 2.5-inch drive on the side of the motherboard tray. This makes it possible to mount up to four 2.5-inch drives or three 2.5-inch SSDs as well as a 3.5-inch hard disk. Behind the motherboard tray there are dedicated rails for cable routing. There is about 16.3 millimeters of space available for discretely managing excess cables. Technical Details:Dimensions without feet: 210 x 334 x 372 mm (W x H x D)Dimensions with feet: 210 x 349 x 372 mm (W x H x D)Material: steel, tempered glassWeight: 6 kgColour: White (outer panels, cable cover), Black (chassis)Form factor: Mini-ITXfan possible in total: 2x 120 mm or 2x 140 mm (front side) 1x 120 mm (back side) 1x 120 mm (cover)of which pre-installed: 1x 120 mm Aer F120 (1,200 rpm, 85.66 m³/h, 28 dB(A), rear) 1x 120 mm Aer F120 (1,200 rpm, 85.66 m³/h, 28 dB(A), lid)Filter: front, bottomRadiator mountings: 1x 240 mm (front side) 1x 120 mm (rear)Drive bays: 1x 3.5 / 2.5 inch (internal) 3x 2.5 inch (internal)power supply: 1x standard ATX / SFX (optional)Extension slots: 2I/O Panel: 1x USB 3.0 Type A (USB 3.1 Gen 1, internal connection) 1x USB 3.1 Type C (USB 3.1 Gen 2, internal connection) 1x 3.5 mm jack (4-pin, TRRS, Audio In/Out)Smart Device V2 Connections: 3x 4-pin PWM (max. 10W per channel) 2x 4-pin RGB (NZXT HUE 2, proprietary) 1x USB 2.0 (9-pin, internal) 1x SATA currentMaximum CPU cooler height: 165 mmMaximum length of the graphics card: 325 mmMaximum power supply length: 311 mmMaximum radiator depth: Front: 85 mm Back side: 42 mmScope of delivery: 1x NZXT H210i 1x set mounting screws 10x cable ties 1x headset adapter (1x 3.5 mm 4-pole to 2x 3.5 mm 3-pole)Manufacturer warranty: 2 years

Related Products:

NZXT H210i Mini-ITX RGB Gaming Case – Black Tempered Glass NZXT H210i Mini-ITX RGB Gaming Case – Black/Red Tempered Glass NZXT H210 Mini-ITX Gaming Case – White Tempered Glass NZXT H210 Mini-ITX Gaming Case – Black Tempered Glass NZXT H210 Mini-ITX Gaming Case – Black/Red Tempered Glass NZXT H710i Midi Tower RGB Gaming Case – Black Tempered Glass NZXT H710i Midi Tower RGB Gaming Case – White Tempered Glass NZXT H510 Midi Tower Gaming Case – Black/Red Tempered Glass NZXT H510 Midi Tower Gaming Case – White Tempered Glass NZXT H510 Midi Tower Gaming Case – Black Tempered Glass NZXT H510 Elite Midi Tower RGB Gaming Case – White Tempered Glass NZXT H710 Midi Tower Gaming Case – Black Tempered Glass NZXT H510i Midi Tower RGB Gaming Case – Black/Red Tempered Glass NZXT H710 Midi Tower Gaming Case – Black/Red Tempered Glass NZXT H710 Midi Tower Gaming Case – White Tempered Glass NZXT H510 Elite Midi Tower RGB Gaming Case – Black Tempered Glass NZXT H510i Midi Tower RGB Gaming Case – Black Tempered Glass NZXT H510i Midi Tower RGB Gaming Case – White Tempered Glass NZXT H710i Midi Tower RGB Gaming Case – Black/Red Tempered Glass Bitfenix Enso Midi Tower RGB Gaming Case – White Tempered Glass Bitfenix Enso Midi Tower RGB Gaming Case – Black Tempered Glass SilverStone PS15 PRO Mini-Tower Case – Black Tempered Glass Jonsplus BO 100 Mini-ITX Case, Tempered Glass – black Zalman S5 RGB Mid-Tower Case – White Tempered Glass Kolink Stronghold Midi Tower Gaming Case – White Tempered Glass Side Window Thermaltake V250 ARGB Mid-Tower Case – Black Tempered Glass Silverstone Fara B1 RGB Mid-Tower Case – Black Tempered Glass Kolink Stronghold Midi Tower Gaming Case – Black Tempered Glass Side Window Zalman X3 ARGB Mid-Tower Case – White Tempered Glass Zalman X3 ARGB Mid-Tower Case – Black Tempered Glass Thermaltake The Tower 100 Mini Chassis Tempered Glass PC Gaming Case – Black Silverstone Fara R1 Mid-Tower Case – White Tempered Glass Thermaltake The Tower 100 Snow Mini Chassis Tempered Glass PC Gaming Case – White Silverstone Fara Mid-Tower Case – Black Tempered Glass Kolink Observatory Midi Tower RGB Gaming Case – Black Tempered Glass Window ASUS ROG Z11 Mini-ITX Gaming case with Tempered Glass Raijintek Ophion Evo Mini-ITX Case – White Tempered Glass Corsair Carbide 275R Mid-Tower Gaming Case – Black Tempered Glass (CC-9011132-WW) Corsair Carbide 275R Mid-Tower Gaming Case – White Tempered Glass (CC-9011133-WW) NZXT H1 v2 Mini-ITX Case with AIO & PSU – Black Tempered Glass