Conceived for industrial heavy-duty applications that require enhanced cooling performance and advanced ingress protection, the NF-A14 industrialPPC (Protected Performance Cooling) is a ruggedised high-speed version of the award-winning retail model. The 24V Q100 variant uses Noctua’s AEC-Q100 qualified wide input range NE-FD4 motor driver IC in order to support 24V-based industrial and automotive applications. Its sophisticated inrush current suppression and extreme electrical robustness with extended burst and surge immunity allow it to operate safely in sensitive or hostile electronic environments. Thanks to the outstanding aerodynamic efficiency of the NF-A14 design and the use of a novel three-phase motor, the industrialPPC version provides superior airflow and pressure capacity while keeping noise and power consumption at a moderate level as against comparable high-speed fans. While its fibre-glass reinforced polyamide construction and certified water and dust protection make the NF-A14 industrialPPC suitable for operation in challenging surroundings, the renowned SSO2 bearing technology guarantees an MTBF of over 150,000hrs. Topped off with Noctua’s trusted reliability and 6-year manufacturer’s warranty, the NF-A14 industrialPPC is an ideal choice for highly demanding applications that require superior flow rates and ultimate dependability.Details:Award-winning NF-A14 designHaving received more than 100 awards and recommendations from the international press, Noctua’s NF-A14 has become a proven premium choice for 140mm cooling needs. Its renowned efficiency has convinced tens of thousands of customers all over the world.2000rpm industrialPPC versionThanks to its elevated 2000rpm top speed, the NF-A14 industrialPPC-2000 provides a significant performance boost over the 1500rpm retail version. Combined with the industrialPPC series’ robust polyamide construction and advanced protection features, this makes the fan ideal for challenging industrial applications.24V versionThe industrialPPC 24V Q100 models use Noctua’s NE-FD4 three-phase PWM motor driver IC. Supporting operating voltages from 6 to 30V, these models are ideal for 24V-based industrial applications and voltage- or PWM-based speed control.Lower speed and noise levels in 12V PC environmentsWhile the industrialPPC 24V model has been designed with 24V industrial applications in mind, it runs at a maximum speed of around 1100rpm in 12V PC environments and can be slowed down further via PWM, thus combining industrialPPC features and design with Noctua’s signature quietness.NE-FD4 PWM IC with SCDSupporting fully automatic PWM speed control, the fan uses Noctua’s custom-designed NE-FD4 PWM IC for 24V three-phase motors. The NE-FD4 is AEC-Q100 qualified and integrates Noctua’s proprietary Smooth Commutation Drive (SCD) technology, which suppresses PWM switching noise and thus makes the fan quieter at lower speeds.AEC-Q100 qualificationThe 24V Q100 version’s NE-FD4 motor driver IC complies with the Automotive Electronics Council’s highly rigorous AEC-Q100 failure-mechanism-based stress test qualification for integrated circuits, which makes the fan ideal for use in automotive applications.High electrical robustnessMeeting the AEC-Q100 standard’s stringent requirements for burst and surge protection, the 24V Q100 version’s high electrical robustness permits the fan to be used not only in automotive projects but also in other harsh environments with transients from electric motors and other inductive switching loads.Inrush current suppressionThe fan’s voltage-stabilised inrush current suppression provides a smooth power-up and dramatically reduces power line transients that otherwise could affect other electronic components connected to the power line. This makes the fan safe to use in sensitive electronic environments.Three-phase motor designWhile most axial fans use single-phase motors with 4 slots, Noctua’s industrialPPC fans feature a three-phase design with 6 slots, which provides smoother transitions between the slots and thus allows for even higher running smoothness, further reduced vibrations and unprecedented energy efficiency.Certified IP67 water- and dust protectionThe motor and PCB of the IP67 version are completely cast in a special, highly heat conductive resin that combines thoroughgoing protection and effective motor heat dissipation. Complying with the ingress protection rating IP67, this fan is not only fully dust tight but also completely waterproof up to 1m water depth.Fibre-glass reinforced polyamide constructionBoth the impeller and the frame of Noctua’s industrialPPC fans are made entirely from fibre-glass reinforced polyamide. This material can withstand temperatures up to 140°C and makes the fans even more robust and break-proof than Noctua’s standard fibre-glass reinforced PBT fans.Flow Acceleration ChannelsThe NF-A14 impeller features suction side Flow Acceleration Channels. By speeding up the airflow at the crucial outer blade regions, this measure reduces suction side flow separation and thus leads to better efficiency and lower vortex noise.AAO FrameAAO FrameNoctua’s AAO (Advanced Acoustic Optimisation) frames feature integrated anti-vibration pads as well as Noctua’s proprietary Stepped Inlet Design and Inner Surface Microstructures, both of which further refine the fan’s performance/noise efficiency.Stepped Inlet DesignNoctua’s Stepped Inlet Design adds turbulence to the influx in order to facilitate the transition from laminar flow to turbulent flow, which reduces tonal intake noise, improves flow attachment and increases suction capacity, especially in space-restricted environments.Inner Surface MicrostructuresWith the tips of the fan blades ploughing through the boundary layer created by the Inner Surface Microstructures, flow separation from the suction side of the blades is significantly suppressed, which results in reduced blade passing noise and improved airflow and pressure efficiency.Integrated anti-vibration padsIntegrated anti-vibration pads made from extra-soft silicone minimise the transmission of minute vibrations while maintaining full compatibility with all standard screws and other mounting systems.SSO2 BearingThe NF-A14 industrialPPC features the further optimised second generation of Noctua’s renowned, time-tested SSO bearing. With SSO2, the rear magnet is placed closer to the axis to provide even better stabilisation, precision and durability.Metal bearing shellIn order to guarantee the highest possible degree of manufacturing precision, minimum tolerance and excellent long-term stability, the NF-A14 industrialPPC sports a CNC milled bearing shell made entirely from brass.6-year manufacturer’s warrantyNoctua fans are renowned for their impeccable quality and outstanding longevity. Like all Noctua fans, the NF-A14 industrialPPC features an MTTF rating of more than 150.000 hours and comes with a full 6-year manufacturer’s warranty.Specification:- Size: 140x140x25 mm- Mounting hole spacing: 124,5×124,5 mm- Connector: 4-Pin PWM- Bearing: SSO2- Blade Geometry: A-Series with Flow Acceleration Channels- Frame Technology: AAO- Rotational Speed (+/- 10%): 2000 RPM- Min. Rotational Speed (PWM, +/-20%): 500 RPM- Rotational Speed @ 12V (+/- 10%): 1100 RPM- Airflow: 182,5 m³/h- Acoustical Noise: 31,5 dB(A)- Static Pressure: 4,18 mm H2O- Max. Input Power: 2,4 W- Max. Input Current: 0,1 A- Voltage: 24 V- Voltage PWM signal: 5 V- MTTF: > 150.000 hContents:- Fan- 4 Fan Screws- Warranty 6 years- Ingress Protection IP67- Material Fibre-glass reinforced polyamide- Motor type Three-phase

Related Products:

Noctua NF-A14 IndustrialPPC 2000RPM IP67 PWM 140mm High Performance Fan Noctua NF-F12 IndustrialPPC 2000RPM IP67 PWM 120mm High Performance Fan Noctua NF-A14 IndustrialPPC 2000RPM PWM 140mm High Performance Fan Noctua NF-A14 IndustrialPPC 2000RPM 140mm High Performance Fan Noctua NF-A14 industrialPPC-24V-3000 Q100 IP67 PWM – 140mm Noctua NF-F12 IndustrialPPC 2000RPM PWM 120mm High Performance Fan Noctua NF-F12 industrialPPC-24V-2000 IP67 PWM – 120mm Noctua NF-A14 IndustrialPPC 3000RPM PWM 140mm High Performance Fan Noctua NF-F12 IndustrialPPC 3000RPM PWM 12V 120mm High Performance Fan Noctua NA-SRC10 3-Pin Low-Noise Adaptors, 3 pack Noctua NF-A14 PWM Chromax Premium Grade Fan – 140mm Noctua NF-A15 PWM Chromax Premium Grade Fan – 140mm Noctua NF-A15 PWM Fan – 140mm EK Water Blocks EK-Vardar EVO 140ER Black BB (500-2000rpm) Fan – 140mm Noctua NF-S12A PWM Chromax Premium Grade Fan – 120mm Noctua NA-SRC7 4-Pin PWM Low-Noise Adaptors, 3 pack Noctua NF-A12x15 PWM 120mm 1850RPM Fan Noctua NH-D15S Chromax Black CPU cooler – 140mm Noctua NF-A12x15 FLX 120mm 1850RPM Fan Noctua NH-C14S Top-Flow Flexible CPU Cooler – 140mm Noctua NH-U14S TR4-SP3 CPU Cooler – 140mm Noctua NF-P14s REDUX PWM 1500RPM 140mm Quiet Case Fan Noctua NF-A6x25-PWM Fan – 60mm Noctua NF-P14s REDUX PWM 1200RPM 140mm Quiet Case Fan Noctua NF-A4x20 PWM 5000RPM Fan – 40mm Noctua NA-FC1 Fan Controller Noctua NF-A4x20 5V PWM 5000RPM Fan – 40mm Noctua NF-A20 5V PWM Fan – 200mm Noctua NF-P14s REDUX 1200RPM 140mm Quiet Case Fan Noctua NF-A4x20 FLX 5000RPM Fan – 40mm Phanteks PH-F140MP 140mm High Static Pressure 2000rpm PWM Fan – Black Phanteks PH-F140MP 140mm High Static Pressure 2000rpm PWM Fan – Black/White Noctua NA-SAV2 Chromax Black Anti-Vibration Fan Mounts – 20 Pack Noctua NF-A20 PWM 200mm 800RPM Fan Noctua NA-SAV2 Anti-Vibration Fan Mounts, 20 pack Noctua NF-A12x25 FLX Fan – 120mm Noctua NF-A12x25 LS-PWM Fan – 120mm Noctua NF-A20 FLX 200mm 800RPM Fan Noctua NF-A12x25 5V PWM Fan – 120mm Noctua NF-A12x25 PWM Fan – 120mm