Renowned for their innovative and high-performance contributions to the world of PC cases, Kolink has created the Balance Midi-Tower as a feature-rich gaming case. This case may have a stunning exterior, but behind this facade lies a lot of space for powerful gaming hardware aswell. All this gaming goodness can be admired through the tempered glass side panel, and as it supports motherboards up to E-ATX in form factor, there will be plenty to look at. A thoughtfully included PSU shroud also helps users stash away unsightly cables. The front of the case, with its fine mesh and air vents, helps ensure not only good airflow, it also helps accentuate the digitally addressable RGB-LED strip and the look of the case as a whole. A switch on the I/O panel allows the lighting to be controlled. Alternatively, the strip can be connected directly to the motherboard and controlled that way instead. The overall ventilation of the case is also helped by the presence of a fine mesh with integrated dust filter on the top. A pre-installed 120 mm fan is also equipped with dARGB lighting.The Features of the Kolink Balance Midi-Tower at a Glance:Stylish Midi-Tower for motherboards up to E-ATX formatTempered glass side panel for an unobstructed view of the interiorFront with fine-mesh ventilation grilleAttractive dARGB lighting on the frontA pre-installed 120 mm fan with dARGB lighting at the rearUp to five 120 mm- and four 140 mm fans possible in totalSpace for graphics cards up to 370 mm tall, CPU coolers up to 162 mmI/O Panel with controller for RGB-LEDs, 1x USB 3.0 and 2x USB 2.0Kolink Balance: Plenty of Space for Powerful Gaming HardwareEven though the outer dimensions of the case are those of a Midi-Tower, the Balance uses its clever design in such a way as to make space for even an E-ATX board if necessary. Graphics cards up to 370 mm in length will fit comfortably, and even tall CPU coolers up to 162 mm in height will fit. One of the highlights of the case is the fact that GPUs can be mounted vertically using a PCI-E riser cable (sold separately) – meaning that users are really free to make their system stand out from the crowd. A PSU shroud conceals the power supply and the HDD cage, where two 3.5″- or two 2.5″ drives can be installed. Two more 2.5″ SSDs can be installed to the rear of the motherboard.As for those who prefer to opt for air cooling, there are more than enough slots for 120 mm fans. The front allows for three 120 mm- or two 140 mm fans to be installed. The roof supports either two 120 mm or two 140 mm fans. The cover is equipped with a mesh that allows the system to benefit from a plentiful supply of fresh air – and this is combined with a dust filter to ensure the interior doesn’t need frequent cleaning either. The rear of the case supports a high-performance 120 mm fan, a 360 mm or 280 mm radiator can be installed in the front, and a further 280 mm radiator can be installed in the roof if needed. The pre-installed 120 mm fan can be replaced with an identically-sized radiator.Tempered Glass and RGB-LEDs: Showcase Your SystemThanks to the clever locations of the cable guides and brackets, users will enjoy the various benefits of smart cable management. All the more important as so much of the case is on show, thanks to the use of a tempered glass side panel. In the centre of the front of the case, users will find a strip with dARGB-LEDs. These LEDs and their effects can be controlled via a switch situated on the I/O panel. Alternatively, the strip can be connected directly to a compatible ARGB motherboard and controlled that way instead. Aside from the RGB button, there are also power- and reset buttons alongside a USB 3.0 port, two USB 2.0 ports, Power/HDD-LEDs, and a 3.5 mm jack for headphones and microphones.Technical Details:Dimensions (H x W x D): 425 x 210 x 470 mmMaterial: Steel, tempered glass, plasticWeight: approx. 6.2 kgColour: blackForm factor: E-ATX, ATX, Micro-ATX, Mini-ITXTotal possible fans:2x 120/140 mm (cover)3x 120 or 2x 140 mm (front)1x 120 mm (back)Pre-installed1x 120 mm ARGB rear sideRadiator Mounts:1x 360/280 mm (front)1x 240/280 mm (cover)1x 120 mm (back)Filter: cover, bottom, frontDrive bays:2x 3.5/2.5 inch (internal, HDD cage)2x 2.5 inch (internal, mainboard tray)Power supply: 1x standard ATX (optional)Expansion slots: 7GPU Mounting orientation: Vertical (dual slot, riser cable sold separately) or horizontalI/O panel1x USB 3.0 type A (internal connection)2x USB 2.0 (internal connection)1x audio in/out1x RGB switchMaximum graphics card length: 370 mmMaximum CPU cooler height: 162 mm

Related Products:

Kolink Inspire Series K10 ARGB Midi Tower Gaming Case – Black Window Kolink Inspire Series K5 ARGB Midi Tower Case – Black Window Kolink Observatory Y Mesh ARGB Midi Tower Gaming Case – Black Window Kolink Void X ARGB Midi Tower Case – Black Window Kolink Bastion RGB Midi Tower Gaming Case – Black Window Kolink Observatory Y ARGB Midi Tower Gaming Case – Black Window Kolink Inspire Series K5 ARGB Midi Tower Gaming Case – Black Window Kolink Inspire Series K11 ARGB Midi Tower Gaming Case – Black Window Kolink Inspire Series K1 RGB Midi Tower Gaming Case – Black Window Kolink Observatory Midi Tower RGB Gaming Case – Black Tempered Glass Window Kolink Observatory Lite Mesh ARGB Midi Tower Gaming Case – Black Kolink Void RGB Midi Tower Case – Black Window Kolink Inspire Series K7 ARGB Midi Tower Case – Black Kolink Stronghold Overseer Midi Tower Gaming Case – Black Window Kolink Quantum ARGB Midi Tower Case – Black Kolink Phalanx V2 Midi Tower ARGB Gaming Case – Black Kolink Unity Code X Midi-Tower ARGB Gaming Case – Black Window Kolink Stronghold Midi Tower Gaming Case – Black Tempered Glass Side Window Kolink Observatory Lite ARGB Midi Tower Gaming Case – Black Kolink Observatory Midi Tower RGB Gaming Case – White Tempered Glass Window Kolink Void RGB Midi Tower Case – White Window Kolink Stronghold Midi Tower Gaming Case – White Tempered Glass Side Window Kolink Inspire Series K8 ARGB Midi Tower Gaming Case – Black Kolink Inspire Series K9 ARGB Midi Tower Gaming Case – Black BitFenix Nova Mesh A-RGB Midi-Tower Case – Black Window Thermaltake Level 20 MT ARGB Midi Tower – Black Window Kolink Stronghold Prime Midi Tower Case – Black Window Kolink Castle Midi Tower Case – Black Kolink Observatory Z Mesh ARGB Super Midi Tower Case – Black Kolink Unity Nexus ARGB Midi Tower Case – Black Kolink Unity Adapt ARGB Midi Tower Case – Black Lian Li Lancool 205 Midi-Tower Case – Black Window Kolink Levante V2 ARGB Midi Tower Gaming Case – Black Kolink Observatory Z ARGB Super Midi Tower Case – Black Kolink Nimbus RGB Midi Tower Case – Black Kolink Horizon Midi Tower RGB Gaming Case – Black Tempered Glass Kolink Ethereal RGB Midi Tower Case – Black BitFenix Nova Mesh A-RGB Midi-Tower Case – White Window Kolink Inspire Series K2 ARGB Micro-ATX Case – Black Window Kolink Void Rift ARGB Midi Tower Gaming Case – Black