Disclosure : This site contains affiliate links to products. We may receive a commission for purchases made through these links.
Jonsbo M. 2-2 ARGB M.2 SSD Cooler – Grey

The Jonsbo M.2-2 Mirage Edition SSD heat sink is a passive cooling solution for Next Generation Form Factor SSDs and offers a stylish design with digitally addressable RGB LED lighting. It’s no secret that the modern M.2 NVMe SSDs in particular tend to get a little warmer when used for demanding purposes, so that the drive speed even has to be throttled. In order to counteract this problem and be able to call up the full performance, the professionals at Jonsbo developed a compact passive cooler that significantly reduces the temperatures of an M.2 SSD . The Jonsbo M.2 SSD cooler at a glance: – Gray passive cooler for M.2 SSDs – Digitally addressable RGB LED lighting – Cooler temperatures to avoid chokes – Compatible with M.2 NVMe SSDs (2280) – Uncomplicated assembly The Jonsbo M.2-2 Mirage Edition SSD heat sink in detail:The SSD passive cooler ensures stable operating temperatures and also visually enhances the M.2 SSD with its raw circuit board design. The gray heat sink is provided on the top with a transparent plastic cover, in which six RGB LEDs are embedded. These can be connected to the mainboard or a corresponding controller via a 3-pin connection (5 V).The heat sink is attached to the top of the M.2 SSD. A thermal pad is included. A SATA power connector provides the power supply. It should be noted that the Jonsbo M.2 SSD heat sink is only compatible with M.2 SSDs with a width of 22 millimeters and a length of 80 millimeters that are equipped with memory chips on one side. Specification: – Model: M.2-3 Radiator – Dimensions: 73mm L * 24.4mm W * 9.6mm H – Colour: Grey / Transparent / ARGB lighting – Applicable hard disk: for M.2 2280 solid state hard disk (single-sided M.2 is recommended) – Heat Dissipation Method: Passive Heat Dissipation – Interface: 5V 3Pin – Light effect: Support motherboard 5V ARGB synchronization, can also fix by separate 5V gorgeous controller(Not including, should purchase by yourself), Single color, rainbow, multi-color cycle, breathing, flashing, audio linkage and other effects. – Size: 75 X 25.2 X 19.3mm/2.95 X 0.99 X 0.76″