Category Archives: PC Systems & Components
Prolimatech Genesis 120mm x 25mm Fan Clips
Prolimatech Samuel 17 CPU Cooler
Alpenfohn Sella CPU Cooler – 92mm

Alpenfohn may be a brand more associated with their high performance products but the Sella CPU cooler is Alpenfohn’s attempt at making a much more budget friendly CPU cooler option. The Alpenfohn Sella is a 92/90mm fan based CPU cooler, similar to products like the SilverStone AR02 and the Cooler Master Hyper TX3. With three
Prolimatech Black Genesis CPU Cooler

Tower CPU heatsinks have been mainstream for the past few years. While power end users may consider them to be pinnacle when it comes to performance, there are others who would prefer down draft low profile heatsinks for their versatile ability to cool not just the CPU but also its surrounding components such as RAM,
Prolimatech Genesis 140mm x 25mm Fan Clips
Raijintek Morpheus II Core Black Heatpipe VGA Cooler

MORPHEUS II CORE EDITION, whole heatsink black coated, a superior high-end VGA cooler, designed to meet cooling capacity up to 360 Watts of TDP. Morpheus II core edition comes with 12 copper heat-pipes, 129 fins, mirror copper base, and the option to install 2×120mm fans; those outstanding combination and design provide best acceleration of heat
Prolimatech Ultra Sleek Vortex Fan Clips for Megahalems

With this set of four special fan brackets allow one or two slim fans with typical 120-mm holes fix (about 105 mm spacing) on Prolimatechs CPU cooler Megahalems and Super Mega. Consequently, for example, a team of two fans of the type Ultra Sleek realize vortex of a Prolimatech Megahalems and Super Mega, so that
Prolimatech Megahalems Fan Clips120/140 mm

With this set of two brackets, a fan with a standard frame can be attached to the Megahalems Tower Cooler from Prolimatech. It should be noted that the clamps offered here are only suitable for fans with normal, straight outer frame, not for example, with fans that have a special, round frame construction. There, these
Raijintek Leto RGB LED Slim 120mm CPU Cooler

Raijintek’s Leto is a heatpipe-based CPU cooler that, conceptually, takes inspiration from their line up of slim-style coolers. This enables the highest possible degree of motherboard compatibility and their respective RAM modules and slots. It offers considerable cooling performance given its position in the mid-range. This is achieved via the height of the cooler which,
Raijintek Leto Pro RGB LED Slim 120mm CPU Cooler

Raijintek’s Leto Pro is a heatpipe-based CPU cooler that, conceptually, takes inspiration from their line up of slim-style coolers. This provides the Leto Pro with the highest possible degree of motherboard compatibility and their respective RAM modules and slots. As such this cooler offers the mid-range performance class a superb degree of performance. This is
Raijintek Juno Pro RBW Low Profile CPU Cooler – RGB LED

The Raijintek Juno Pro is a low-profile CPU cooler and was specifically developed as a replacement for boxed coolers. It offers a high cooling capacity for its small dimensions and offers an attractive appearance thanks to the black anodized aluminum heat sink. In addition, the top blower is equipped with RGB LED lighting in the
Raijintek Mya RBW Rainbow LED CPU Cooler – 120mm

The Raijintek Mya RBW is a tower cooler for processors from AMD and Intel. The massive heat sink is made of glossy, black anodized aluminum. The wave-shaped cooling fins optimize the airflow and are penetrated by six copper heatpipes. These run through the base plate and touch the CPU directly over a large area. In
Raijintek RBW-Add RGB Control Kit

The RBW-ADD Controller Hub from Raijintek is a low-cost way to retrofit Raijintek’s RBW series of RGB LED lighting or extend existing lighting to up to eight 4-pin RBW products. This control kit has a remote control and the ability to connect to motherboards with 3-pin addressable RGB header and can thus loop through the
Raijintek Pallas Low Profile 120 Black CPU Cooler – 120mm

The Pallas 120 is a high-performance low-profile CPU cooler from Raijintek and has six copper heatpipes, a black anodised aluminum heat sink and recorded including a 120 -mm fan height of just 6.8 centimeters. The Raijintek Pallas 120 low-profile CPU cooler at a glance: – Low height of only 68 mm – 6x 6mm direct
Raijintek Eos RGB Rainbow Complete Water Cooling CPU Cooler – 360mm

Raijintek now offers a broad portfolio of efficient and powerful all-in-one water cooling systems, from the entry-level system to the high-end, everything is represented. The Raijintek EOS 360 RBW must clearly be counted to the latter category. The outsourced pump allows more flexibility when installing the heat sink on the CPU. The features of the
Raijintek Eos RGB Rainbow Complete Water Cooling CPU Cooler – 240mm

Raijintek now offers a broad portfolio of efficient and powerful all-in-one water cooling systems, from the entry-level system to the high-end, everything is represented. The Raijintek EOS 240 RBW must clearly be counted to the latter category. The outsourced pump allows more flexibility when installing the heat sink on the CPU. The features of the
Raijintek Morpheus 8057 Heatpipe VGA Cooler For Nvidia RTX and Radeon RX – Black

A cooler change is particularly useful if the factory-installed cooler is too loud or does not provide enough cooling capacity. With the Morpheus 8057 provides Raijintek a powerful cooler for graphics cards from NVIDIA and AMD reference design to. With its enormous size and the possibility of mounting two large fans , it offers the
Prolimatech Genesis CPU Cooler

Tower CPU heatsinks have been mainstream for the past few years. While power end users may consider them to be pinnacle when it comes to performance, there are others who would prefer down draft low profile heatsinks for their versatile ability to cool not just the CPU but also its surrounding components such as RAM,