Disclosure : This site contains affiliate links to products. We may receive a commission for purchases made through these links.

Arctic BioniX F120 Grey/White PWM Fan – 120mm

Arctic is best known for its very quiet CPU cooler. The innovative fans make a significant contribution to this reputation. With the high-performance BioniX series , Arctic also offers its fans with a distinctive frame design, which, thanks to the high static pressure, can be used especially on CPU coolers and radiators. The Arctic F120 PWM 120 mm fan generates an air flow of 69 CFM/ 117 m³/h and a static pressure of 2.1 mmH2O at a maximum of 2,300 rpm. The connection is made via a 4-pin PWM connector. Arctic uses a high-quality, hydrodynamic slide bearing. This not only guarantees smooth operation, but also ensures that the volume does not increase over time. With an enormous guarantee period of ten years, this information is not only promised. EXTENDED LIFE SPAN 10 °C lower motor temperature doubles the life span. The BioniX gaming fans have a four times longer service life through low coil temperature. Therefore, we extend the warranty to 10 years. MAXIMUM QUIETNESS, MINIMUM VIBRATION Extremely quiet operation through a newly developed motor guarantees long sessions without annoying noise. ARCTIC’s new motor of the BioniX Fans eliminates vibrations directly at its source, in particular at the motor. The ARCTIC motor absorbs 95 % of vibrations compared to a conventional DC motor. Thus, there is no need for rubber spacers due to the steady torque and smoother switching of the magnet field. 200 TO 1800 RPM With a wide range of regulation and the PWM Sharing Technology (PST), the BioniX F120 fan speed can be controlled synchronously with all your other fans together and thus keep the noise at a minimum while guaranteeing maximum cooling performance when needed. OPTIMISED FAN DESIGN We further optimised the fan blade design to get a higher airflow at lower noise generation. This guarantees high pressure and highly efficient ventilation for your gaming case. ENHANCED BEARING Due to a new alloy/lubricant combination developed in Germany, the friction within the bearing is reduced and a greater efficiency is achieved. This way, there is less heat development as well as less bearing noise and you can enjoy a longer service life of your cooler. Specifaction: – Fan Speed: 200 – 1800 rpm – Airflow: 69 CFM/ 117 m³/h – Static Pressure: 2,1 mm/H2O – Noise Level: 0.5 Sone – RPM Controll: PWM PST – Connector: 4-Pin-Connector + 4-Pin-Socket – Fan Bearing: Fluid Dynamic Bearing – Typical Voltage: 12 V DC – Startup Voltage: 4.8 V – Current: 0.20 A / 12 V – Cable Length: 400 mm – Length: 120 mm – Width: 120 mm – Height: 27 mm – Weight: 129 g