Disclosure : This site contains affiliate links to products. We may receive a commission for purchases made through these links.

Phanteks Glacier One 360MPH All In One CPU Water Cooler + Phanteks SK120 DRGB PWM Triple Pack

The Phanteks Glacier One 360 MPH is a premium quality all-in-one (AiO) liquid cooler. It features three powerful 120mm fans with high static pressure. There is also a PWM-controlled pump to provide users with the sufficient cooling for an advanced modern system. Its aesthetics are equally impressive with easy to configure digitally addressable RGB lighting and an eye-catching mirror with an infinity effect.The Phanteks Glacier One 360 MPH AiO Liquid Cooler at a Glance:White all-in-one liquid cooler360mm aluminium radiatorHigh-performance pump with PWM control for quiet operationsThree 120mm PWM fans with high static pressurePump cover with D-RGB lighting and infinity mirrorEasy installation and high compatibilityThe Phanteks Glacier One 360 MPH AiO Liquid Cooler in detail:The Phanteks Glacier One 360 MPH has a 360m dual radiator and is constructed from aluminium with a fin density of 21 FPI. This provides a large surface area for cooling while retaining a compact form factor.PWM controls provide adjustable cooling and guarantee high-performance. In general, the pump reaches speeds of up to 2,800rpm but it can run at 3600rpm once coolant reaches temperatures exceeding 60°C. An Intelligent protection mechanism automatically responds to high temperatures and adjusts the pump’s speed accordingly. These combined features ensure your PC hardware will run safely and at its optimum.The three 120 mm fans feature large fan blades that achieve a high static pressure and can pass up to 102.80 m/h (60.50 cfm). A daisy-chain cable design prevents cables from getting tangled up.In addition to a compact design, the Phanteks Glacier One 360 MPH has angled fittings to enable high compatibility with motherboards, memory modules and other components.High Performance and an elegant designThe radiator-pump combination is undoubtedly the AiO cooler’s visual highlight. It is equipped with RGB lighting and an infinity mirror. As well as a total of 14 digitally addressable RGB LEDs. Illumination effects can be controlled via Phanteks RGB controller or software.The flexible tubes are sleeved and contribute to a stylish design. With the included tube clips, the tubes can be easily positioned. The Glacier One 360 MP is already prefilled and pre-applied with heat conductive paste on the CPU contact surface.A cover can be magnetically attached to the pump housing after mounting. This results in a stylish and clean look.Specification:Weight: 1.21kgColour: WhiteRadiator: Measurements: 394 mm x 120 mm x 27 mm (L x W x H) Material: Aluminium FPI: 21Pump: Measurements: 93 x 41 x 92mm (W x H x D) Material: Copper, Plastic Speed: max. 2800 rpm +/- 300 at 100 % (PWM controlled), 3600rpm when coolant over 60 °C Bearing: Ceramic Noise: max. 27 dB(A) Lenght of cable: 245mm Power: 2 V, 0.3 A, 3.6 W MTTF: 50,000 hoursPump Top: Material: Plastic, Tempered Glass RGB lighting: 3-pin D-RGB LED (5V, Data, Ground) Number: 14 LEDs Power: 5 V, 0.42 A, 2.1 W Lenght of RGB cable: 550mm + 75mm daisy chainTubes: Length: 400mm (sleeved) Diameter: 11mm Material: EPDM Special features: 3 Clips enclosed, rotatable FittingsFans: Type: 3x 120mm (120 MP PWM) Measurements: 120 x 120 x 25mm (W x H x D) Speed: 500 – 2,200 rpm +/- 10 % Airflow: 23.44 – 102.80 m/h (13.79 – 60.50 cfm) Static pressure: 0.17- 3.41 mm H2O Bearing: UFB (Updraft Floating Balance) Noise: 18 – 34.2 dB(A) Connector: 4-pin PWM Length of cable: 130mm daisy chain + 500mm extension Power: 12 V, 0.15 A, 1.8 W MTTF: 150,000 hoursFan Frames: Type: PHANTEKS Halos D-RGB Measurements: 120 x 120 x 7mm (W x H x D) RGB lighting: 3-pin Digital-RGB LED (5V, Data, Ground) Number: 30 RGB LEDs Length of cable: 550mm + 75 mm daisy chainCompatibility: Intel: 1700, 115x, 1200, 1366, 2011(-V3), 2066 AMD: AM4, sTRX4, TR4 (mounting mechanism not included)Warranty: 6 yearsEquip your gaming PC with Phanteks SK120 dRGB Fans and experience high performance cooling. There are three fans included in this bundle, all featuring the white aesthetic and 12 dRGB LEDs embedded into the frame. With PWM technology and a 9-blade design, these fans are the perfect balance between silent operation and high-performance cooling.Phanteks SK120 dRGB Fans – 3 Pack at a Glance:Three pack of 120mm PWM dRGB fans with fully white aesthetic12 dRGB LEDs embedded in the fan frame for even lighting9 blade design fan for focussed airflowBalanced between silent operation and high performanceEquipped with a silent sleeve bearing and rubber dampenersDaisy chain cable for easy cable managementSilence and PerformanceStriking the perfect balance between silent operation and performance, the Phanteks SK120 dRGB Fans utilise PWM technology and high airflow for effective and efficient cooling. On simpler workloads, these fans operate at slower speeds to reduce noise level, but can increase up to 1500RPM when your gaming PC demands it. Overall, they produce 27dB(A) of noise, so even at their fastest these fans are whisper quiet.With their nine-blade design, the Phanteks SK120 Fans focus the airflow for improved cooling potential. Each fan is equipped with a Rifle Bearing, a sleeve bearing that promotes silent operation. As a result, you can enjoy effective and efficient cooling with minimal noise interruption.Solid ConstructionMaking these robust, the Phanteks SK120 Fans have a unique, rigid frame design. Paired with rubber dampeners, this frame further reduces vibrations and noise levels, as well as contributing to their overall durability. Plus, with their two-year warranty, you can enjoy lasting performance with these fans equipped in your PC case.Daisy Chain RevolutionTo improve cable management, the Phanteks SK120 Fans have dRGB Daisy Chain connectors. Instead of each fan being linked back to the motherboard or universal hub, they can be connected in sequence. Only one needs to be wired into the system. This allows for much sleeker and tidier cable management, whilst still providing full support to your fans.LightingEach fan comes equipped with 12 dRGB LEDs. These are embedded in the frame and shine onto the blades, creating a smooth and even glow. Colours and effects can be controlled by compatible dRGB motherboards, cases, or software. Light up your chassis with Phanteks SK120 dRGB Fans.Phanteks SK120 dRGB Fans – 3 Pack Specifications:BrandPhanteksModelSK120 dRGB PWM Fans – 3 packNumber of Fans3ColourMatte WhiteFan Dimensions120mm x 120mm x 25mmW x H x DBearing TypeRifle bearingBlade GeometryNine blade designRated VoltageDC 12VOperating Voltage Range4 ~ 13VPWMYesRated Current100% 0.15A +/-0.02Locked CurrentBrake protectionPower Consumption2.64W + 10% maxSpeed500 ~ 1500RPM-10% to +5% leewayMax Airflow50 CFM (ft3/min)Max Air Pressure0.96mm H2ONoise Level27dB(A)Fan Connector4-pin PWMCable Length550mmdRGB Connector3-pin dRGB Daisy Chain ConnectorsdRGB Cable Length300 + 100mmLED Number12 dRGB LEDS per fanLED Rated VoltageDC 5V (+5V/D/GND)LED Rated CurrentMax 0.36A +/- 0.04AMTBF40,000 hoursWeightNet: 137.9gGross: 171.3gWarranty2 year warranty