Disclosure : This site contains affiliate links to products. We may receive a commission for purchases made through these links.

Alpenfohn Wing Boost 3 140mm Addressable RGB PWM Fan – Triple Pack

Addressable Wing Boost 3 fans from Alpenföhn, Triple set with 3x 140 mm, Digitally addressable RGB-LED lighting (3-pin), PWM-controlled, Includes remote, Receiver, Splitters & screwsThe Wing Boost 3 RGB combines the many advantages of its famous predecessors with a circular ring of digitally addressable RGB-LED lighting in its outer frame. The eponymous “Wing Boosts” consist of small raised areas on the impeller intake side of the blades that help reduce air turbulence. The fan therefore operates at lower noise levels than conventional fan designs would allow. The triple-set offered here consists of three fans and an RF receiver, splitter cables and a remote control for synchronising the set of fans.The Features of the Alpenföhn Wing Boost 3 RGB Fans at a Glance:Three 140 mm fans with digitally addressable RGB lightingHydrodynamic bearings for high performance, quiet operation and increased durabilityOptimised rotor blades deliver the perfect balance between static pressure and airflowOperates at 400 to 1.500 RPM4-Pin PWM- and 3-pin RGB connectionIncludes RGB- and PWM splitter, RF remote and receiver with screwsASUS Aura, MSI Mystic Light, Gigabyte RGB Fusion and ASRock PolychromeWing Boost 3 RGB: Powerful 140 mm FanThe Wing Boost 3 RGB is a PWM-controlled, 140 mm fan that is equally at home operating as a case fan, CPU cooler or radiator cooler. The fan operates at between 400 and 1500RPM, producing a massive airflow of 100,6 m³/h with a static pressure of 2,19 mm H2O.The hydraulic bearings and the rubber dampeners in the fan frame help to guarantee the fans operate whisper-quietly, even at low speeds. At full load, the Wing Boost 3 RGB produce noise levels of at most 19 dB.Addressable RGB-LED Lighting in the FrameThe Alpenföhn Wing Boost 3 RGB is equipped with digitally addressable RGB-LED lighting. The manufacturer has integrated a glowing ring with up to 16,8m colours into the fan frame, which shines a subtle light onto the fan wheel. This can be controlled by means of a 3-pin RGB connector with a compatible motherboard or controller. The Wing Boost 3 RGB is compatible with ASUS Aura, Gigabyte RGB Fusion, ASRock Polychrome RGB and MSI Mystic Light.Included in this set, in addition to the three fans from the Alpenföhn Wing Boost 3 RGB range, are all the necessary accessories to synchronise the PWM signals and the RGB-LED lighting. The lighting can be controlled via the bundled remote control. Technical Details:Dimensions: 140 x 140 x 25 mm (W x H x D)Material: plastic, rubberColour: BlackVolume: max. 19 dB(A)Speed: 400 – 1.500 rpmAirflow: max. 100.6 m³/hVoltage: 12 VVoltage range: 7 – 13,2 VRated power: 1.32 Winput current: 0.11 AConnection:4-Pin PWM3-Pin RGB (addressable)Lighting: RGB (16,8m colours)Accessories:3x Alpenföhn Wing Boost 3 RGB12x Case screws12x Screws for radiator1x RF remote1x RF receiver1x RGB splitter1x PWM splitter